Technical Services Engineer – Qatar

TECHNICAL SERVICES ENGINEER

POSTED ON : 19/11/2020 CLOSING DATE : 25/11/2020

Objective:

Responsible for co-ordination with all third-party customers, repair and overhaul and design agencies, providing technical support to Doha main base, out station operations and to support Engineering Management by oversight of all aspects of engineering, to ensure efficient, cost effective and safe activities are maintained at all times.

 

Key Responsibilities and Accountabilities:

 

  • Single point of contact with OEM’s for co-ordination of requests for repair schemes and with regard to all technical matters.
  • Single point of contact with Design Agencies for co-ordination and provision of technical data in relation to modifications required for Company aircraft i.a.w QCAA certification and regulation requirements. .
  • Participate in the investigation of aircraft incidents and accidents as requested, aircraft incidents and component failures, and to recommend necessary actions to prevent re-occurrence.
  • Assist in monitoring of computer trend systems (TSE in charge)
    • P&WC HECTM
    • Exceedance monitoring system and Turbine Tracker
    • Any other monitoring systems that may be introduced.
  • Review all Technical Literature issued by Aircraft and Engine Manufacturers, Vendors and Airworthiness Authorities and recommending necessary action to embody improvements, to ensure Flight Safety and continued Airworthiness of Company aircraft.
  • Respond to all technical queries generated from the Company Main Base of Operation and from operations away from base, as applicable, and taking the appropriate action by issuing Alert Messages, and recommending changes to the Approved Maintenance Programme and the Company CAME & MOE, where appropriate.
  • Punctually reviewing all Company Incident Reports, Voyage Reports, MOR’s & MEMS for engineering content and taking the necessary action to prevent a re-occurrence. This function is to be carried out in conjunction with Director of QCM&HSE, CA Manager, Technical Services and Reliability Manager and where appropriate, the manufacturer or repair agencies and any other agencies as applicable.
  • Punctually reviewing all Company Incident Reports, Voyage Reports, MOR’s & MEMS for engineering content and taking the necessary action to prevent a re-occurrence. This function is to be carried out in conjunction with Director of QCM&HSE, CA Manager, Technical Services and Reliability Manager and where appropriate, the manufacturer or repair agencies and any other agencies as applicable.
  • Identify and recommend action with regard to defects likely to compromise Flight Safety.
  • Review requests for amendments to Company Technical Publications for validity and making recommendations to the QCM&HSE department (Quality Compliance Monitoring and Health Safety Environment) for amendment incorporation, as appropriate.
  • Review the reliability of components in order to reduce or eradicate problems affecting those components, which realise an unacceptably high failure rate, at minimum cost to the company.
  • Liaise with the Procurement Department to devise at minimum cost to the Company, solutions aimed at reducing high DOC items.
  • Analysis of trends for component and consumable consumption in coordination of the Finance Department for Management understanding and information.
  • Optimise component procurement policy by identification of suitable vendors with prices and terms and conditions that are deemed to be in the best interests of the Company.  Assist the Procurement Department on the technical aspect of overhaul and repair of aircraft components and equipment. .
  • In liaison with the Technical Services and Reliability Manager, review and monitor all component including power section and reduction gearbox repair quotations for cost and work scope and identify adverse trends.
  • Maintaining an accurate recording and filing system to ensure that any relevant information regarding past and present projects is readily identified for consideration in any new arising.
  • Liaise with third party customers on technical issues as and when required, and in conjunction with the Director of Engineering and Maintenance Manager, produce quotations for third party work.
  • To carry out any other appropriate duties as detailed by the Continuing Airworthiness Manager or Technical Services and Reliability Manager.

 

Qualifications:

  • Licensed A&C or Avionics Engineer (B1, B1.3 or B2) with a minimum of 7 years’ experience, preferred but not necessarily on Company Type(s) and holding the relevant ratings.

or

  • Academic degree in technical discipline from a university or other higher educational institution, with minimum of 3 years of experience in continuing airworthiness environment.

Experience:

  • Minimum of 2 years in a similar position.

Job-Specific Skills:

  • Documented experience and usage of EASA regulations
  • Fluent in English, both written and spoken
  • Experience in Continuing Airworthiness Management environment.
  • A good working knowledge and experience of windows-based computer programmes including those used for trend monitoring.
  • Working knowledge of warranty and defect reporting.
  • Working knowledge of defect reporting and compiling compliance documents

 

 

Should you meet the above requirements, please apply and fill out the online application form and kindly attach your detailed & updated CV and the above mentioned attested/authenticated educational certificates, employment certificates, passport copy etc. for our review and reference.

 

Only shortlisted candidates will be contacted.

Closing Date:  24 November 2020

Source: Careers – Gulf Helicopters